Page 1 of 2 [1 2]
click to see more
Master Global Fuel Injection Test Kit
Covers all major platforms, foreign and domestic, 1988 through 2005
Includes five most popular banjo bolt test adapters: M14 x 1.50, M12 x 1.50, M12 x 1.25, M10 x 1.00 and M8 x 1.00
Save thousands! - Do your own timing belt Factory style. Just the 50mm head alone is $75.00 at the factory - and the bar is another $75.00 - so this is a great price on this unit. Break Loose the crank shaft pulley / harmonic balancer bolt. Designed to properly secure the pulley from rotating during R&R of crank bolt. The 50mm hex head armature slips past the tightest of spaces and slides right into the center slot on the pulley. Then slide the 2.5� foot long securing bar onto the receiving end of the armature and lock it into position with the securing bolt. Applicable: Honda and Acura models, 90+,with the above mentioned center 50mm hex slot in crank shaft pulley / harmonic balancer.
Special kit assembled for the professional Honda & Acura Technician consisting of Part#'s HO 50 & HO 60, which sahre the same 2.5 foot long securing bar. Needed to properly counter the rotation of the crank shaft pulley / harmonic balancer during R&R of crank bolt. HO 50 is applicable on Honda and Acura models, '90+,with a 50mm hex slot in crank shaft pulley/harmonic balancer. HO 60 is applicable on model - Civic, '80s+.
Needed for the proper installation of Balance Shaft oil seal. Applicable: Engine - 2.0L and 2.2L, '90+.
This crank shaft oil seal installation kit was specifically designed to aid the professional Honda / Acura technician with the crucial task of proper and easy harmonic balancer oil seal installation. The press cup is of a high quality anodized aluminum which will not damage the oil seal or engine. The threaded step bolt scres into the crank bolt hole. The press nut and washer provides the technician with an even and straight pressing force, seating the new oil seal into the engine case every time.
Special kit assembled for the professional Honda & Acura Technician consisting of Part#s HO 100 & HO 105, which share the same step bolt and press nut. HO 100 Cam Shaft Seal Installer is applicable on Honda engines - 1.8L, 2.0L, 2.2L. All 4 cylinder Honda engines, '84+. Some 4 cylinder motorcycle engines. HO 105 Balance Shaft Oil Seal Installer is applicable on engines 2.0L and 2.2L, '90+.
Needed to properly counter the rotation of the crank shaft pulley/harmonic balancer during R&R of crank bolt. Comes complete with the proper 2.5 foot long securing bar. Applicable: Model - Civic, '80's+. Comes complete as shown with an adjustable locator lack pin and a 2.5' long securing bar, which locks onto the head.
The LTILT825 allows the mechanic to tap out all bearing hub rotor assemblies in all Hondas and Acuras while keeping the wheel bearingÆs seal intact and preventing any damage or contamination to critical front wheel bearings. The technician can easily complete a full service brake job in one-half the book time. This tool is affordable for all brake technicians, selling for a fraction of the other tools available on the market today.
Honda / Acura (excludes Trapped-Bearing types)
OTC6733
Two piece kit contains specialty ball joint adapters for the following Honda and Toyota vehicles:
Honda CRV 1997-2005, Honda Odyssey 1995-2004, Toyota 4 Runner 1996-2005, Toyota Sequoia 2001-2003 and Toyota Tacoma 1995-2005
Item Number: 25741 Product Code Number: OTC 6733
OTC6734
Ball joint adapter kit for use with OTC7248 C-Frame on 2003-2007 Honda Accord sedans, 2003-2007 Honda Accord coupes and 2004-2007 Acura TSX. Item Number: 25742 Product Code Number: OTC 6734
Needed for the proper extraction of auxiliary valves. Used in conjunction with a slide hammer. Applicable: Most every early Honda model.
